While there are home fixes that you can do on your own, there are also a few that will require the knowledge and skills of pros. Electrical works, for instance, involve a lot of safety risks, thus, requiring the help of a licensed and experienced electrician. Doing a DIY job is risky since you can’t be certain of the main source of the electrical problem and the right approach in fixing the same.

Prioritize safety in your commercial or residential property by leaving electrical fixes to the hands of professionals. To know when it’s time you should call the help of pros, check out these clear signs of electrical problems.

Electrical Sparks

Electrical sparks in outlets are not normal. In most cases, they indicate a serious problem and must be given immediate attention by professionals. If neglected, electrical sparks can potentially start a fire or seriously damage electrical components or appliances.

Flickering Lights

Have you noticed the constant flickering of lights in some areas of the house? Such occurrence doesn’t only provide inconvenience in homes but may also compromise safety especially during night time. Don’t hesitate to seek help from your trusted local electricians. Flickering lights can be caused by problems in the wiring or a fluctuation in household voltage.

The Smell of Burning Plastic

Never ignore a strong smell of burning plastic in your home. Upon noticing the same, check first where the smell is coming from. Whether or not you are able to find the source of the burning smell, make sure to call in licensed electricians to inspect your home.

This can indicate burning electrical wiring which can cause a house fire. Thus, it’s important to give it immediate attention.

Outdated Wiring

Do you have damaged or frayed wiring in the house? If yes, make sure to clear them away and replace them with help from the pros. Whether your damaged electrical wiring is caused by rodents, inappropriate use or wear and tear, the exposed cables can cause shock or electrocution once touched.

The Old Age of the Electrical System

When was the last time you called a professional team to inspect or check your electrical system? If the system has been running for years now without periodic inspections from electricians, now is the time that you call them before you put your household in great mess and danger.

Appliance Fixes

When doing installations, repairs or replacements of electrical components or appliances, forget about doing a DIY job and leave the same to the pros. This is necessary for buildings to comply with local code requirements. Additionally, licensed electricians have the proper tools and equipment to use, thus, saving you money from brand new purchases or rental fees for one-time equipment use.

Frequently Tripped Circuit Breakers

This incident typically happens when the circuit is overloaded, preventing wires from overheating and cause a fire. However, if your circuit breakers trip frequently, this can already be alarming and you need to call in reliable electricians to check on the situation in your home.

Warm to Touch Electrical Components

When a switch or circuit is warm to touch, it means the electrical component is overloaded. In worst cases, this can lead to an electric shock, putting your family at high safety risks. To remedy the situation, it’s best to call for professional help. Your trusted local electricians might advise you to get a component upgrade.

Blown Fuse

Many conditions cause a fuse to blow, but one thing is for sure; you can’t fix such electrical issue on your own. Diagnosing the cause of a blown fuse is risky and takes time without help from skilled electricians. Neglect a blown fuse in the house and you’ll be having a bigger problem on your hands later on.

Power Outage

When all the lights and appliances in your home went out, you have the right to suspect a serious electrical problem. Electricity is a necessity when running a household. Dozens of household chores can pile up when electric power goes out even for a day.

Clear indicators of system failure include a blown fuse or tripped circuit breaker.

Importance of Access Doors in Electrical Repairs

When electrical components are fixed behind plaster, reaching them in case of repairs becomes difficult and time-consuming since you will need to break a wall or ceiling. Whereas, concealing them behind a wall or ceiling access doors provides access to these components fast and easy. For different application requirements in residential or commercial places, there is a wide range of ceiling access doors to choose from. Customized solutions are also available for your special construction needs.

Whether simply renovating your home or preparing it for sale, investing in regular and proper electrical system maintenance and repair has great benefits to offer. For both minor or major electrical problems, call in licensed and experienced electricians to help you out.

This is a guest post contributed to Right Electrical Services, LLC by Access Doors and Panels.

Access Doors and Panels

Choose from our huge selection of access doors, wall panels, floor hatches and more! All your favorite brands in one place.

How to Improve Electrical Wiring in Your Home and Save Money

Are you frustrated by overpaying on your electric bills? Are you concerned about the fire safety of your home, or find yourself continuously dealing with the stress caused by faulty electrical appliances? If you answered yes to any of these questions, it’s time to give serious thought to upgrading your home’s electrical wiring.

Heavy-duty appliances like air conditioners and refrigerators consume a lot of electricity. These appliances generate heat which can wear down your existing wiring if they are not of top-notch quality. As a result, you run a chance of electrical overload, higher electricity bills, and a lack of fire safety in your home. If your property is more than 40 years old, it is time to consider electrical rewiring.

Your electrical wiring should be updated to power the latest electrical appliances. In order to sell your home, you need to have an excellent electrical inspection report to achieve the highest possible sale value. Poor wiring will more than likely cause you to fail the electrical inspection. Let’s take a look at a few of the best ways to improve the electrical wiring system in your home and save money at the same time.

Choosing the Right Wiring For Fire Safety

Electrical safety should be a top priority in any home. With so many cases of houses catching fire due to electrical overload, damaged insulation in wiring, or the wire itself catching fire due to overheating, it is clear that taking the necessary safety precautions should be a primary concern. Electrical fires can not only be fatal but also cost a lot of money. You can ensure the safety of you and your family and also save money by taking the necessary precautions to prevent fires from the start.

The first thing that you need to do is ensure that your home’s electrical wiring system is of the highest quality. Depending upon the number of appliances that you use, your electrician can guide you on the amperage required for your home. Taking amperage into account, you will need to select electrical wires of different amp ratings like 100-amp or 200-amp wiring. You should also avoid aluminum wiring and go for more expensive copper wiring instead, as copper wiring has a significantly reduced risk of overheating and causing an electrical fire.

While copper wiring may cost you more up front, it will most assuredly save you money in the long run. When you are confident about the gauge and amperage of your electrical wiring, buy bulk wire to save on one-time costs. Depending upon the purpose of the wiring, you may have to go for different insulations, too, like indoor or outdoor wiring.

Electrical Upgrades to Protect From the Risk of Electrocution

Do you feel a tingling sensation when using your laptop or a small electrical appliance? Do your new appliances get damaged quickly? If so, then chances are your home doesn’t have adequate electric grounding. A house that lacks electrical grounding can be fatal as well as expensive. To combat this, you should install three-pronged outlets for all your major appliances to ensure proper grounding. With sufficient grounding, any excess electricity will not get into the device but go into the ground, thus increasing the overall longevity of your appliance.

You can also install a Ground Fault Circuit Interrupter (GFCI) outlet in areas that are vulnerable to moisture like kitchens, pools, or bathrooms. GFCIs are economical devices that protect you from electrocution in especially moist areas. If you want your house to pass an electrical inspection with flying colors, you should ensure that you have installed AFCIs (Arc Fault Circuit Interrupter) in your bedrooms. AFCIs work to break the circuit in the occurrence of electrical overarching, preventing electrical fires. Without AFCIs, your home will not get a favorable electrical inspection report and you will lose the sale value or rental value of your property.

Updated Panels and Smart Meters

Sometimes, you can have the right electrical wiring but still end up paying high electricity bills. If your wiring is correct and you want to save money on your electric bill, you should consider upgrading your main switch panel.

Let’s say that your house is around a decade old. After an electrical inspection, you may find that your home has a supply of only 100 amps while you are running electrical appliances that demand somewhere around 200 amps. Instead of replacing the entire electrical wiring system, which would cost you well over $10,000, you can save money by installing a new electrical panel of 200 amps.

If you are someone who frequently forgets to switch off electrical appliances after use, you should consider installing smart meters in your home. Smart meters can help you save on electricity bills. A smart meter observes your regular room-heating habits and other electrical uses and shuts them off when nobody’s using them. Smart meters can even switch on the heater when you are coming back home for a shower!

Wiring for Electronics

Always remember that quality electrical wiring can last a century if installed correctly. It is highly recommended to never take on electrical wiring installation yourself unless you have prior electrical service experience. Save money and ensure the electrical safety of your home by contacting Right Electrical Services today! We’ll be happy to assist you in upgrading your home’s electrical wiring.

This is a guest post contributed to Right Electrical Services by Jessica Smith. Jessica has been writing for a few years now. She loves cooking, traveling and dancing. She wants to be a successful writer as writing is her only passion.

Effective Tips on Growing Your Electrical Business

Making it big in the electrical business requires a lot of patience and hard work. Since there are a lot of risks involved in an electrical job, property owners will need assurance that you can provide them with safe and efficient service. Success does not happen overnight, but with these effective tips, you might just be able to get ahead in the industry’s tough competition. 

Provide Great Customer Service

Creating a positive relationship with your clients is one way to be successful in any business. Listen to your customers, understand their demands and requirements. It takes paying attention to every little detail of your client’s needs to build and earn trust. After a project is done with a client, follow up with an email survey and ask them to rate your service and offer suggestions for improvement. 

Invest in Top Grade Equipment

One important consideration property owners keep in mind when hiring an electrical company is the quality of equipment or tools used. The use of new technology or top grade equipment provides the ability to accomplish electrical tasks quickly and accurately. There are a lot of newly developed specialized tools today that you can use to level up in your job.

Maintain High Safety Standards

Observing strict electrical safety regulations is a requirement when performing electrical work. As a wise business owner, you need to equip your team with the proper electrical safety training on the job and tools usage. This will keep them away from risks of personal injury as well as from inflicting serious damage to properties. 

Meet Project Deadlines

Accomplishing project assignments on time and with quality results will earn you positive feedback from your clients. This also indicates that you can be trusted and clients will not hesitate to hire you again for another project or refer you to their friends or colleagues. 

Partner With Reliable Suppliers

Bid any project with confidence by partnering with a reliable and trustworthy supplier. Clients will be most interested to hire a company that can cut their project costs. Thus, dealing with a brand that can supply you affordable yet quality materials will work to your great advantage.

Suggest Electrical Equipment With Energy-Saving Features 

Providing your clients with better options doesn’t only show your expertise in the field but also makes your brand a standout among others. Aside from installing energy-saving electrical fixtures, provide for a better maintenance solution by recommending wall access panels. 

To succeed in your electrical business, you need to be more than a master of the trade. As a business owner, your work responsibility now extends to leading the team, branding, marketing, etc. Challenges are expected along the way, so don’t forget to pack a bunch of patience and positivity with you. Best of luck!

This is a guest post contributed to Right Electrical Services, LLC by Access Doors and Panels.

Access Doors and Panels

Choose from our huge selection of access doors, wall panels, floor hatches and more! All your favorite brands in one place.